The ‘Door Grabber’

£14,450.00 (Inc VAT £17,340.00)
Quickview
£14,450.00 (Inc VAT £17,340.00)
Medit i700 Intraoral Scanner
EquipmentThe Medit i700 is the key to unleash your clinic's full potential, with powerful hardware and intelligent software. The Medit i700 makes the scanning experience a comfortable one for both dentist and patient.
Unlike the most scanners in the market, Medit i700 can be directly connected to the PC using power delivery cable without power hub and extra cables. This new feature of Medit i700 improves the mobility and the maintenance. Medit Link is a fully open system for you.
Book a free demo today - simply email ian@quoris3d.com.
£14,450.00 (Inc VAT £17,340.00)

£9,800.00 (Inc VAT £11,760.00)
Quickview
£9,800.00 (Inc VAT £11,760.00)
D4K 3D Dental Printer
Equipment- The precision of the D4K Pro is very high due to its sophisticated software and its projector which has 2712 x 1528 Pixels. This resolution provides the accuracy needed to build accurate model with dies and Analogue models which most of the available printers on the market cannot build.
- Due to its quality, the D4K Pro provides in addition to the accuracy , the consistency and reputability needed by professional customers.
- In short, the D4K Pro is the best value for money available today on the market.
£9,800.00 (Inc VAT £11,760.00)

£15,983.00 (Inc VAT £19,179.60)
Quickview
Envisiontec One Cdlm Dental
Equipment
Created by one of the most experienced teams of engineers in 3D printing, the Envision One cDLM is the largest, most advanced desktop 3D printer ever created. It is bigger, faster, easier to use and more innovative than all the other 3D printers on the market.
£15,983.00 (Inc VAT £19,179.60)
£15,983.00 (Inc VAT £19,179.60)

£224.00 (Inc VAT £268.80)
Quickview
Medit i500 Interchangeable Tips – Pack of 4
Equipment
The i500 scanner tip is the part of the scanner that is inserted into a patient’s mouth during scanning. The tip can be reused for a limited number of times but must be cleaned and sterilised between patients to avoid cross-contamination.
Cleaning and Sterilizing Medit i500 Tips
– Clean the tip using soapy water and a brush, and inspect the mirror found in the tip. If the mirror appears stained, smudged or has a milky haze, repeat the cleaning process using a soft dish brush and soapy water. Carefully dry the mirror with a paper towel.
– Put the tip into a paper sterilization pouch and seal it. Make sure the pouch is airtight by using either a self-adhesive pouch or a heat-sealed pouch.
– Sterilize the wrapped tip in an autoclave with the following conditions:
£224.00 (Inc VAT £268.80)
- At 121℃(249.8°F) for 30 minutes, and dry for 15 minutes
- Using any other method besides autoclaving does not guarantee the sterilization of the tips.
£224.00 (Inc VAT £268.80)