Medit T510 Dental Scanner

The i500 scanner tip is the part of the scanner that is inserted into a patient’s mouth during scanning. The tip can be reused for a limited number of times but must be cleaned and sterilised between patients to avoid cross-contamination.   Cleaning and Sterilizing Medit i500 Tips  – Clean the tip using soapy water and a brush, and inspect the mirror found in the tip. If the mirror appears stained, smudged or has a milky haze, repeat the cleaning process using a soft dish brush and soapy water. Carefully dry the mirror with a paper towel. – Put the tip into a paper sterilization pouch and seal it. Make sure the pouch is airtight by using either a self-adhesive pouch or a heat-sealed pouch. – Sterilize the wrapped tip in an autoclave with the following conditions:

• At 121℃(249.8°F) for 30 minutes, and dry for 15 minutes

– Use an autoclave program that dries the wrapped tip before opening the autoclave.

• Using any other method besides autoclaving does not guarantee the sterilization of the tips.

The Medit i700 is the key to unleash your clinic's full potential, with powerful hardware and intelligent software. The Medit i700 makes the scanning experience a comfortable one for both dentist and patient.

Unlike the most scanners in the market, Medit i700 can be directly connected to the PC using power delivery cable without power hub and extra cables. This new feature of Medit i700 improves the mobility and the maintenance. Medit Link is a fully open system for you.

Book a free demo today - simply email ian@quoris3d.com.